News

Company News

Industry News

Media Coverage

Classification of power line towers

Release Time:

2018-11-28

Pole towers are divided into the following 7 types according to their purposes:

(1) Linear towers: used to support wires, insulators, metal weights, and withstand side wind pressure. The number of linear pole towers accounts for more than 80% of the total number of poles, usually represented by the symbol "Z".

(2) Crossing towers: used for special facilities or crossing each other with roads, railways, rivers, electric power and weak current lines, and ensure that the crossing distance meets the requirements of the design regulations. The symbol "K" is used to represent spanning towers.

(3) Tensile tower: used to withstand the horizontal tension of the wire for construction and maintenance, and to limit the scope of the accident in the case of broken wires and falling rods. The tensile tower is represented by the symbol "N".

(4) Corner towers: used for line corners, divided into two types: straight-line corners and tensile corners. The corner tower is represented by the symbol "J".

(5) T-connector tower: used for line branch points, represented by the symbol "T".

(6) Terminal tower: It is used for the starting point of the line or the end point of the power receiving end, and one side of it should bear the wire tension of the tension section on the line side. The terminal tower is represented by the symbol "D".

(7) Transposition tower: In the power network with the neutral point directly grounded, when the length exceeds 100km, in order to make the inductance and capacitance of each phase equal, reduce the interference to the adjacent parallel communication lines, and balance the asymmetric current, and the set replacement Bit pole tower. The transposed pole dry tower is represented by the symbol "H".

The company has more than 60 years of production history. It has a provincial-level power transmission and transformation grid engineering technology research center and a provincial-level enterprise technology center;

Henan Dingli Tower Co., Ltd. was recognized as a provincial technology center

On September 9, 2017, the technology center of Henan Dingli Tower Co., Ltd. was jointly recognized as the twenty-first batch of enterprise technology centers in Henan Province by the Henan Provincial Development and Reform Commission, the Department of Science and Technology, the Department of Finance, the State Taxation Bureau, the Local Taxation Bureau, and the Customs.

Congratulations to the official website of Henan Dingli Tower Co., Ltd. officially launched!

The company has large-scale production equipment such as 3,200-ton CNC hydraulic bending machine, flange assembly welding machine, intersecting wire cutting machine, gantry drilling machine, internal welding machine, etc.

Henan Dingli Tower Co., Ltd. achieved excellent results in the Zhumadian Welding Skills Competition

On December 13, the Zhumadian 2Skills Competition017 Skills Competition came to an end. Young welders from Henan Dingli Tower Co., Ltd., Li Yaoqiang, Xu Dongdong, and Zhang Zhuangzhuang won the first and second place (tied) in the city.

Classification of power line towers

Pole towers are divided into the following 7 types according to their purposes:

Strong quality and integrity, Dingli is famous!

On November 6, 2019, Henan Quality Association released the evaluation results of the 2019 "Henan Province Quality Brand" project and the evaluation results of the 2019 "Quality Integrity System AAA-level Enterprise".